Epoxy-Coat Garage Coating Kit
Out of the whole batch, this wasn’t really our favorite floor coating for garages. It comes with a lot of stuff but it’s a little on the pricey side.
- One package covers up to 500 square feet
- Wide temperature range
- Tools are included
- Great for indoor application
- Works on wood and concrete floors
- Not recommended for outdoor use
- Glossy finish might not be to everyone’s taste
- Brand: Performance Industries, LLC
- Color: Beige
- Surface: Floor
- Finish Type Cycloaliphatic Epoxy
- Special Features: One Coat Coverage
When you buy a floor coating from Epoxy-Coat, you are in good, and in some cases, illustrious, company. Not only does the US Army and NASA use their products, but companies including Ford Motors, Disney, Caterpillar, and Boeing count themselves as customers too.
This specific product is known as their Standard Full Kit, which is capable of coating a concrete floor area of up to 500 square feet. It requires only a single coat, is self-drying and once set, it will resist hot tires, chemicals, and oil.
First sold in 2013 this product comes with a lifetime guarantee, and currently has a patent pending.
Who is this product for?
One of the great features of this epoxy floor coating is that it comes with everything you need to apply it, therefore, if your DIY knowledge is not great, you do not need to concern yourself about what tools you might need.
Typically, this product will be used by domestic or commercial customers who have a concrete floor which requires re-coating. These floors will most likely be in a household garage or workshop, small shop, storage area or a small industrial unit whose floor requires coating.
Beyond the water supply that you’ll need to clean up, the Epoxy-Coat Floor Coating Kit comes with everything you will need to mix and apply a new coating on your concrete floor. Here is the complete list:
- 2 gallons Epoxy-Coat resin (Part A)
- 1 gallon Epoxy-Coat activator (Part B)
- 1.5 lbs. decorative flake
- 12 oz. prep solution
- Epoxy clean and prep solution
- 0.5 lbs. aluminum oxide non-skid
- Pair of vinyl gloves
- Measuring stick
- 15″ mechanical mixer
- 9″ roller cover
- 3″ brush
Overview of features
The list above should have already alerted you to the fact this floor coating kit is ideal for first-time users and those who like everything to be as simple as possible. With all the tools included, mixing and applying the floor coating should be straightforward.
Once applied, the epoxy coating provides protection for concrete flooring, although it should be noted that it is also suitable for coating tiled, metal and wood floors, provided they do not have any direct UV exposure.
The coasting will resist chemical, oil and gas spillages and it also provides a slip-resistant, odorless surface which can withstand hot tires too. Its durability means it will still be providing the same levels of protection in 20 years, as it did the day it was applied, and just in case anything goes awry there is the reassurance of Epoxy-Coats’s lifetime guarantee.
How to use it
As with jobs which involves mixing chemical substances or solutions and applying them, you should always read the instructions very carefully, especially those which relate to health and safety.
Thereafter, you need to fully prepare the existing floor. This can involve work which includes removing existing coatings, smoothing out bumps, filling in holes, removing grease spots, cleaning, drying, and covering fixed items so that they do not get splashed or marked.
Once you have prepared everything the basic process to mix and apply the epoxy floor coating is as follows:
- Mix the resin in its individual bucket for 2 minutes to ensure the color is what you desire.
- Pour both the resin and the activator into the large mixing bucket, and mix thoroughly for 3 minutes.
- Empty the bucket on to the floor at the farthest point in the room.
- Use the brush to spread the coating to the base of the wall.
- Use the squeegee to spread the coating across the floor.
- Use the roller to make the coating consistent and even.
- Apply the aluminum oxide anti-skid (if required).
- Apply the decorative flakes (if required).
If you already have all the required kit and accessories to mix and apply epoxy floor coating, then a simple and cheaper alternative is ‘Coloredepoxies 10002 Clear Epoxy Resin Coating.’
This comes as a 3-gallon kit, so there should be enough to cover a garage floor area of up to 170 square feet. You can either use the basic clear formula, or if you wish to brighten up the floor, there is a choice of colors which includes blue, brown, beige, red, beige, and black.
The cost is at least 25% less than the Epoxy-Coat Floor Coating Kit, so there is a considerable saving too.
You may check out this related article, ”Best Epoxy Floor Coating of 2022 Complete Reviews with Comparisons” for more floor coating choices.
There’s no doubt the big advantage of the Epoxy-Coat Floor Coating Kit, is the fact that it comes with everything you need to use it. Not only does this make it easier and more convenient, it also provides great value for money.
The quality and durability of the coating are backed by a lifetime guarantee and further evidence of its pedigree is it is manufactured by a company with an impressive list of clients.