If you are considering renovating your garage floor with an epoxy coating, you should start with proper planning.
The epoxy coating industry has progressed and innovated to the point where you can do anything with epoxy. If you don’t do the right research, your garage floor project can turn into a disaster.
Regardless if you have the classic bare concrete garage floor, you’ll want to start by deciding on the colors and designs you want, and then work backwards, starting with floor prep and making sure you have the right tools and application process to get the job done right.
But how do you choose the right coating? The market definitely isn’t short of options, so we’ll tell you what you should take into consideration.
Well, here you’ll learn all you need to know about finding the best coating. Before we get into all the features to look for, take a look at the best we’ve found.
Rust-Oleum Epoxy Shield Garage Floor Coating Kit
If you have a garage floor, basement floor or workshop area whose floor needs a protective coating, then Epoxyshield from Rust-oleum is definitely one to consider.
- Highly durable
- Easy to apply
- Cost effective
- Can have issues with peeling if not applied correctly
- Potential color consistency issues
- Brand: Rust-Oleum
- Color: Dary Gray
- Finish Type: Matte
- Paint Type Decorative
- Surface: Floor And Concrete
If you have a garage floor, basement floor, or workshop area whose floor needs a protective coating, then Epoxyshield from Rust-oleum is definitely one to consider. Rustoleum has been around for decades. Actually, Epoxyshield garage floor coating by Rustoleum was founded in 1921 on the principle of providing innovative products that protect surfaces from the elements. Floor paint, garage floor coating kits, and epoxy paint floor coating kits are synonymous with Rustoleum (rust oleum epoxy garage floor).
The reason is because 1) the epoxyshield garage floor coating is really easy to purchase and is easily accessible.
The next reason is that epoxy garage floor coatings are not always easy to install. With epoxyshield, the project is pretty simple and it’s much better than regular garage floor paint. It’s not quite the same for hot tire pick up as bringing in an industrial grinder and installing several coats of 100% epoxy coatings which are usually done by a professional installer, but all in all, it looks great on a concrete floor, is very professional looking and shouldn’t give you any problems at all.
Epoxyshield garage floor coating kit is also 1/8th the cost of a professional installation with a 2,000 lb grinding machine (which comes with its own problems, trust us).
Rust Oleum Epoxy Garage Floor Coating Kit
Rust-oleum is a company that has been producing protective products for almost 100 years, and their Epoxyshield garage floor coating kit is one of the hundreds that they make for both domestic and industrial use.
Specifically, it is a solvent-based epoxy floor coating that is used for covering and protecting concrete floors in garages, although it can also be used for workshops, basements, and other small rooms or areas which have concrete floors up to an area of up to 200 square feet per gallon of the coating.
First sold in 2009, Epoxyshield will dry to a gloss finish and comes with decorative chips should you wish to add them to the coating. While the featured option color is Tile Red, it is also available in Dunes Sand and Silver/Gray
Who is this Product for?
Rust oleum Epoxyshield floor coating is relatively easy to apply so it’s good if you are planning to install your garage floor kit yourself. That being said, you will have to ensure that the floor in question is properly prepared for the application of the coating. This will include activities such as removing existing sealant, scrubbing, cleaning and drying and potentially preparing the floor with a hand grinder prior to application. But this coating is better to apply than others which are bound to peel without full preparation. Epoxyshield is also low odor so you won’t have to clear out your house after the application. Just apply, wait 24 hours and you will be ready to go.
Likely customers will be those who wish to apply a new coating to concrete surfaces and also want one which will also protect that floor. It will be suitable for both domestic and commercial floors so small units such as workshops or storage rooms can have their flooring coated for both protection and to improve its appearance.
None of the tools or accessories that you may need to prepare the existing floor and apply the floor coating are supplied so these will need to be purchased separately. Some of the likely items you may need include a wire brush, duct tape, plastic sheets, and a mixing/roller tray.
What you do get are the following items:
- 1-gallon floor coating base
- 1-gallon floor coating activator
- Decorative chips
- Set of instructions
Overview of Features
An epoxy floor coating has two very simple objectives and that is to protect the floor and to make it look better. With Epoxyshield both of these are achieved. It protects the floor against wear and tear from traffic and footfall and is resistant to water and chemicals if they are spilled.
In terms of making the floor look more presentable, it has a gloss finish, and there is also the option of using the decorative flakes which are supplied. The quantity supplied is enough to cover a 200-square-foot area, and to do so is extremely easy. After preparing the floor all you need do is mix and apply it.
How to Apply Epoxyshield Rust oleum Epoxy Garage Floor
One of the most crucial steps you can take to ensure your floor coating is applied successfully is to fully read the instructions which come with it. When it comes to any garage floor coating, preparing the concrete is 80% of the job.
Preparing the Garage Floor for Epoxy
When it comes to the epoxyshield floor coating kit, it’s important to note that they suggest etching the floor. This process is simple and can be broken down into 3 steps.
- clean the entire floor thoroughly with a broom
- Spray the entire floor and clean it again with a broom
- Fill up a watering pale with water and etching material
- Apply the etching agent to the concrete and let it sit for 3 minutes
- Hose down the entire garage and broom clean the garage again
- Following that, handle any crack repair that is needed
Each brand of epoxy floor coating can have differences in how it should be applied to others. Even if you have used this type of floor coating before, don’t assume that the same steps apply to this one.
Generally, you will need to prepare the existing floor, and this could include simple actions such as scrubbing it with a wire brush, or more complex ones such as removing an existing floor sealant with a grinder.
Once the floor has been prepared and cleaned to remove grease spots, for example, the process to apply the new coating can begin. This involves mixing the two main components, namely the base and the activator, together in a pail. It then needs to stand for around 30 minutes before mixing it again and then pouring the mix into a roller tray.
The coating is then applied to the floor using a roller for the main floor and brushes for edges or spots where the roller cannot access. If you plan to use the decorative chips, then apply the coating to 4ft. by 4 ft. areas and throw on the chips for more even distribution of them across the entire floor.
Alternative Epoxy Coating kits
Should the floor area be larger than 200 sq. ft, or you would prefer a flooring kit which includes everything you need, including the necessary tools, then Epoxy-Coat’s Floor Coating Kit would be an excellent alternative.
It can cover 500 square feet which is well over double what Rust-oleum’s Epoxyshield can, and it comes with tools such as gloves, a squeegee, roller cover and brushes. You also have a huge choice of colors too which includes blue, yellow, red and white. It’s made in the USA and comes with a lifetime guarantee.
Don’t miss out our article on the “Best Epoxy Floor Coating Complete Reviews with Comparisons“, for more floor coating choices.
Epoxyshield is a low-cost floor coating which is easy to apply and ideal for concrete floors in garages, workshops and storage rooms. It is made by Rust-Oleum which is a garage floor coatings manufacturer that has been in business since 1921, and with a lifetime guarantee, it should protect your concrete floors for many years. We definitely consider this a good buy.